Endure

From: $56/Can
Solvent-based Wet Look 2L Can $56
Solvent-based Wet Look 10L Can $223
Solvent-based Wet Look 20L Can $403
Solvent-based Wet Look 200L Can $2628

ENDURE is a unique blend of premium acrylic resins formulated especially for application to most coarse stone, masonry and concrete surface, giving a wet look and protection against staining from most common spills. • Do not seal under 10°C or over 30°C. • Always wear Personal Protective Equipment (PPE) – A minimum requirement of Safety Glasses, Mask, Gloves & Boots. Damage to clothing may occur. • Apply 2-3 thin coats of ENDURE to a clean dry surface with an ENVIRONEX LAMBSWOOL APPLICATOR or ENVIRONEX VITON SEAL SPRAYER. (If sprayed dilute with 4 Litres of CYCLONE per 20 Litres of ENDURE.) • Coverage approximately 10m2 per Litre per coat. The number of coats and coverage depends on the porosity of the surface. • Only use REFRESH pH neutral detergent for daily or weekly maintenance. • Always test first.

Get a Quote for FREE!

STORE LOCATION

Is Your Best Choice

CONTACT US

Address:

457 Springvale Rd, Glen Waverley, Vic.3150

Telephone:

Opening Hours:

Mon to Fri: 9:00am - 5:00pm
Sat: 9:00am - 4:00pm
Sunday and Public holidays closed